RAMCO HILUX

India's best rated Boards & Tiles for Wall, Ceiling, Panel Systems. It introduced the innovative Calcium Silicate Board, a versatile building material, using Japanese technology from the ASK Corporation, Japan.Dealer,Manufacturer,India,producers

Dry Wall Solution      >>       INSTALLATION
  • PARTITIONS
  • FIRE RATED PARTITION
  • Two Hour Partition
  • METAL FRAMED PARTITIONS
  • One Hour Partition Four Hour Partition
    Single Layer Partition One and Half Hour Partition
  • ALUMINIUM STUD PARTITION
  • Partition with CSB Fillets Two Hour Partition
  • TIMBER STUD PARTITION
  • Double Layer Partition
  • FIRE RATED HIGH WALLS
  • WALL LININGS
  • One Hour Partition
  • JOINTING & FINISHING
  • PARTITIONS

    Hilux Partitions consists of Calcium Silicate Board screw fixed to either side of timber, aluminium or light weight galvanized metal frames.

    The partitions are non-load bearing and can easily be assembled at site. The partitions can be used in most type of buildings, new or existing, like Commercial, Residential, Industrial, Hotels and Hospitals, Single to multiple storey buildings etc. The partitions can be simple space divisions, office cubicles (low height partitions) to greater height partitions (Refer Partition System Selector Chart for details). These partitions can be erected in high humid areas and under humid conditions. The light weight metal sections in partitions make it cost effective and contribute towards savings on structural costs.

    Frame Work

    Timber or aluminium sections of 50 x 50 mm and 50 x 25 mm can be used as studs to form a regular grid of 610 x 610 mm size. Light weight galvanized steel sections can also be used to form a cost effective frame work. These frames are fixed to the floor and soffit at 600 mm centres with nylon sleeves and wood screws. A intermediate channel is provided horizontally (in case of G.I. Sections) at board joints, where the partition height exceeds the board length.

    Board Fixing

    Hilux tapered edge boards are screw fixed to either side of all timber/metal studs by self drilling & taping screws having Phillips head with under head cutter, of suitable length (10 mm + thickness of the board) at 200 mm centres (12 mm away from the edge and 40 mm from the corners), with a gap of 1.5 to 2 mm. The boards are chamfered at square edges by 4 x 3 mm, or made tapered (40 x 1.5 mm) at site, by grinding them, before fixing. The joints are to be staggered to avoid through joints. Insulating materials like mineral wool of required thickness and density can be placed in the cavity to enhance fire, sound and thermal insulation properties.

    Openings for Door / window / glazings

    Hilux partitions can easily provide opening for the doors/ windows or glazings by modifying the frame in its initial stage.

    Services

    Services should be incorporated before commencement of other side boards.

    Jointing & Finishing

    Hilux Calcium Silicate Boards joints are finished with specially formulated jointing compound and 48 mm wide, fiber tape to get seamless finish.

    RAMCO HILUX
    Downloads
    Clean Room Brochure
    Board Brochure
    Tile Brochure
    FireBook
    Sound Book
    Water Book
    RAMCO HILUX
    RAMCO HILUX
    2016 © Ramco Industries Limited